electronics

Surface Mount vs Through Hole: A Detailed Comparison

By |2024-07-24T12:53:05-05:00August 1st, 2024|Innovation, News, Supply Chain, Technology|

In the realm of electronics manufacturing, two primary methods dominate the landscape: Surface Mount Technology (SMT) and Through Hole Technology (THT). Understanding the nuances between these two approaches is crucial for Original Equipment Manufacturers (OEMs) aiming to optimize their production

The Benefits of the CHIPS Act for Businesses

By |2024-07-24T06:07:34-05:00July 24th, 2024|Innovation, News, Supply Chain, Technology|

The CHIPS and Science Act represents a significant legislative effort by the United States government to boost semiconductor manufacturing, enhance national security, and foster innovation across various sectors, including original equipment manufacturers (OEMs).  This article aims to provide an in-depth

The Most Important Metals in Electronics Manufacturing – Rare Earth Metals

By |2023-02-14T12:04:45-06:00February 14th, 2023|EMS, Manufacturing, Supply Chain|

Rare earth elements (REE) are key parts of modern manufacturing. Even though they’re invisible to most end consumers, they’re indispensable metals in electronics manufacturing. Like other minerals, rare earth metals have a limited supply. But despite being called rare, they’re

Avoiding The Dreaded Cold Solder Joint

By |2022-09-30T22:45:05-05:00September 30th, 2022|Best Practices, EMS, Manufacturing, Printed Circuit Boards|

Good solder joint formation is a prerequisite in electronics manufacturing. The failure of one small solder joint can compromise the functioning of an entire PCB and cause intermittent faults, which can significantly reduce the lifespan of any device and lead

What does “potting” mean in electronics manufacturing?

By |2022-05-16T18:09:22-05:00May 16th, 2022|Best Practices, Design, EMS, Engineering, Manufacturing, Printed Circuit Boards|

Potting boxes are among the most common electronic enclosures. They protect the box’s internal components from physical damage and environmental factors. Potting also enhances electronic insulation. However, the approach is slightly different from other strategies used in electronic enclosure design

The Halogen Free PCB

By |2022-02-16T14:43:13-06:00February 16th, 2022|Best Practices, Component Sourcing, EMS, Innovation, Manufacturing, Outsourcing, Printed Circuit Boards, Process Improvement, Supply Chain|

Fluorine and chlorine have negative health effects when present in certain concentrations in circuit boards. This is the reason IEC came up with halogen free PCBs. Since electronics contain materials with high concentrations of halogens, to have a halogen free

IPC 610 vs IPC 620

By |2022-02-02T10:52:45-06:00February 2nd, 2022|EMS, Manufacturing, Printed Circuit Boards, Process Improvement|

IPC 610 and IPC 620 are two of the most common programs in the electronics manufacturing industry. Unfortunately, the two can be very confusing, especially if you’re just getting started with IPC programs. This guide focuses on the difference between

Electronic Enclosure Design Guidelines

By |2022-01-20T23:28:40-06:00January 6th, 2022|Best Practices, Design, Documentation, EMS, Engineering, Manufacturing, Printed Circuit Boards|

The role of enclosure design in the electronics industry cannot be overstated. From the smartphones in our pockets to extension cords and home theaters, the outer cover of these devices is crucial to their function, performance, and life. PCB enclosures

Intrinsically Safe Electronics

By |2021-12-06T09:51:41-06:00December 6th, 2021|Best Practices, Component Sourcing, EMS, Innovation, Manufacturing, Outsourcing, Printed Circuit Boards, Process Improvement, Supply Chain|

Workplace health and safety procedures are crucial for the well-being of both employees and employers. All industries have safety risks, but in high-risk environments, people face real dangers as they earn their livelihood. When designing electronic equipment for use in

Electronic Components Sourcing Options – Pros and Cons

By |2021-10-29T15:19:07-05:00October 29th, 2021|Component Sourcing, EMS, Manufacturing, Outsourcing, Printed Circuit Boards, Process Improvement, Supply Chain|

Whether you have an in-house process for manufacturing electronic components or depend on a CEM (Contract Electronics Manufacturer), it's critical to have a steadfast supply chain. Unfortunately, today the supply chain is experiencing serious difficulties due to the global pandemic,

Go to Top